Tips For Replacing a Window Handle
The replacement of the handle on your window is a simple project that can be completed from the convenience of your own home. Use these helpful tips to ensure smooth operation and a stunning look.
Start by removing the screw covers to reveal the screws within your uPVC window handle. Measure the spindle to make sure you're getting the right size replacement.
1. Take a measurement of the Spindle Length
It is essential to get the spindle size right when replacing windows handles. It can influence the tightness or looseness of the handle and whether the handle will lock correctly into the frame of the window. The spindle is a metallic shaft that connects the handle to the lock in the frame of the window. The spindle can be found in the standard 8mm industry cross-section or the more traditional versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always this way. It is important to check the measurements when purchasing the handle you want to purchase.
Remove the handle. This is easily done by turning the handle to the open position, then unscrewing two screws that keep the handle in place (which are usually hidden behind plastic caps that must be removed). After the handle is removed, measure the distance from the base to the point at which it ends. This will give you the measurement required to purchase a replacement.
There are many choices when it comes to selecting a new window handle from sleek chrome that blends into modern homes to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail latches! The possibilities are endless, but the most important thing to do is choose a style that suits your home.
Espag handles are commonly used to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles can vary between 58mm and 62mm, but there are replacements for both sizes. Cadenza window handles have an entirely different dimension as they feature an bent blade that is used to operate the multi-point lock mechanism within the window.
When choosing a window handle, you should also consider the hand you use to open your door. Inline espag handles can be used with right or left-handed windows. Cranked window handles are only used for windows that are open in one direction.
2. Remove the Handle
A window handle that falls out can be frustrating, whether the handle is damaged or worn out. repairmywindowsanddoors.co.uk is, you can repair a uPVC handle by yourself. You'll need only a few basic hand tools as well as some time to complete this process.
You will need to first open the window and make sure it's not locked. The next step is to remove the screws which hold the handle in position. Once these are removed, you can begin to work on removing the handle itself.
The handle itself is attached to a spindle in the window frame. Depending on the kind the handle is held in place either with a screw or pin. The most common handles are the inline Espagnolette and the cockspur handles. Both of these types of handles are used on casement windows, which includes aluminium windows. You can lock the handles by using a key to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.
To remove the handle you will need a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. After the handle has been removed, you'll have to measure the spindle length and ensure that the new handle is a good fit.
Once you have the right size, you can fix the new handle into place. It is crucial to make sure that the handle is securely attached and rotates in the correct direction (clockwise in the case of an open or counterclockwise if the handle is closed). It is essential to make sure that the handle has not been installed upside down.
Replace the cap screws. After you've completed this step, you can test the handle to be sure it's functioning properly. Also, you should test the locking mechanism by moving the handle to the locked position, and then returning it to the locked position.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is usually the first thing to show signs of wear and wear and tear or damage. This could be due to natural elements, regular use, or even damage caused by criminals trying to gain access to your home. But, a simple fix can easily solve the problem and stop the issue from occurring again.
uPVC handles may also be difficult to remove if the locking mechanisms are not working correctly. It's often possible to solve the problem by replacing the multipoint locking mechanism rather than the whole handle. This could save you money.
After removing the old handle, you'll need to remove any screws that secured it. They're usually on the inside face of the handle base. You may require a screwdriver to accomplish this and it's crucial that you don't over tighten, as this could cause the handle to loosen.
Then you will need to find the pins or screws that hold the handle in place. Again these are likely to be located on the inside face of the handle base and you'll need an screwdriver or a pair of pliers in order to remove them. Once they're removed you will have to replace the caps on the screws should you choose to do so, and then test the new handle to ensure it's functioning properly.
Install the handle by adjusting the spindle to the cutout in the window mechanism. Then screw it into. If you wish to replace the screws ensure that the handle is in a position that is open and that any screws are securely attached. Once you've completed this, you're done and are able to enjoy your new window handle. This should help you avoid costly window and door replacements in the near future. If you would like more assistance regarding this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Install the new handle
Whether you're replacing a broken handle or simply making it more modern the process is simple and can be completed in a matter of a few steps. Identifying the kind of window handle, measuring its spindle length and knowing the tools you'll require to complete the task are key. Always consider security when working with windows and tools. It's also important to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.
To begin, locate the screws that hold the window handle in place. Remove them while firmly gripping the handle to stop it from falling and causing injury. Once the screws are removed, you can place them in a safe location to be replaced later.
Once the old handle was removed, you are now able to begin fitting your new handle. The handle needs to be perfectly positioned for it to function properly and secure the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole of the window mechanism, ensuring that it is securely in place.
After the new handle is in place, the last thing to do is to replace the screw caps and test it to make sure it works. If you're not happy with the result or the window doesn't open and close properly contact our experts for help.
Almost all homes in the UK have uPVC windows and as such, many of them will need to be replaced in the near future due to wear or breakage. Anyone with some DIY experience can easily complete the task. The most important aspect in the success of the procedure is ensuring that you're using a handle that is compatible with your existing window in terms of dimensions and style. If you're not sure about the type of handle you require, please get in touch with our team who can provide you with the possibilities available.